Success Of I Wave’s Arinc 818 2 Ip Core &Amp; Presenting Our Arinc 818 2 Switch Ip Core}

Hardware

Success Of I Wave’s Arinc 818 2 Ip Core &Amp; Presenting Our Arinc 818 2 Switch Ip Core}

Success of iWave’s ARINC 818-2 IP Core & Presenting our ARINC 818-2 Switch IP Core

by

iwave systems technology

Success of iWave’s ARINC 818-2 IP Core & Presenting our ARINC 818-2 Switch IP Core

iWave is a leading FPGA design house with an extensive variety of FPGA IP Cores. iWave redesigns all IP Portfolios consistently to meet the market demands. One of the most pre-dominant being ARINC 818-2.

iWave has successfully licensed ARINC 818-2 IP Core to many of our esteemed clients around the world. In continuation to the effective outcome of ARINC 818-2 IP Core, we are gratified to present you our ARINC 818-2 Switch IP Core. iWave’s ARINC 818-2 Switch IP core is complaint with ARINC 818-2 standard.

Why Switching is required?

ARINC 818-2 was designed as a point-to-point protocol. Since a vast portion of the newer applications of the ARINC 818-2 have several displays with many channels of ARINC 818-2 (4 to 8 Channels), switching has turned out to be more imperative.

The new prerequisite requires that dynamic switching happens between the frames. Essentially, to avoid broken video frames. This requisite is one of the many features of our Switch IP.

[youtube]http://www.youtube.com/watch?v=9m7SldTq8CY[/youtube]

ARINC 818-2 IP core Webserver page setup

Features of ARINC 818 Switch IP:

Link rate: 4.25Gbps

Real-time link Control & Monitor through Web Browser

Intelligent, Synchronous switching of video frames

Error Counter

Below are the types of transmission method:

Broadcast: One video information is directed to all or numerous video output

Unicast: A video information is sent from one point to another point. In this case, there is just one sender and one receiver

Multicast: A video data is diverted to at least two video outputs

Mixed: Client can reroute any video input to any video output

ARINC 818-2 Switch IP can be configured, monitored and controlled by the web interface as in the above figure. This interface is compatible with common web browsers like IE, Chrome, Firefox, etc.,

iWave’s ARINC 818-2 Switch IP is tested at SXGA (1280 x 1024) Resolution at 4.25Gbps on KC-705 (XC7K325TFFG900-2) based platform & it can likewise be altered according to the client provided ICD (Interface Control Document)

iWave has also evaluated ARINC 818-2 IP Core on Altera Stratix IV GX Development Board & Xilinx Kintex 7 Evaluation Kit ARINC818-2 IP Core Evaluation Platform

For further information or enquiries please write to mktg@iwavesystems.com or contact our Regional Partners.

iWave Systems Technologies, an ISO 9001:2015 certified company, established in the year 1999, focuses on standard and customised System on Module/SBC product development in Industrial, Medical, Automotive & Embedded Computing application domains. iWave Systems also provides comprehensive Engineering design services involving Embedded Hardware, FPGA and Software development.

iWave’s Hardware expertise spans complex board design up to 30 layers; Analog , Digital & RF Designs; FPGA Development up to 3+ million gates and VHDL / Verilog RTL Development & Verification. Our Software expertise ranges from OS Porting, Firmware & Device Drivers Development and Wireless & Protocol Stacks to Embedded Application Development.

The company designs and develops cutting edge products and solutions. iWave has been an innovator in developing highly integrated, high performance, low power and low cost System-On-Modules(SOM) and Development Platforms. iWave has been able to develop advanced products for its customers using its SOMs in the shortest possible time at the most optimized design cost.

iWave Systems has won the confidence of its esteemed customers spread across the globe by being a reliable design partner in developing innovative products. iWave’s typical customers are semiconductor chip designers, RTOS & Protocol vendors and OEMs. Our services portfolio comprises Turnkey Design, Test and Prototype (NPI) & ODM and Onsite resourcing support. Our solution offerings cover Customization, Licensing and ODM. iWave specializes across Industrial, Automotive and Medical Domains. iWave Systems is headquartered in Bangalore, India with offices in Japan and France.

Article Source:

eArticlesOnline.com

}